Skip to Content
flagi Polish English French German Russian Slovak Hungarian Regulus Ukraine

INSPIRO – NEXT GENERATION OF RADIATORS

 

  • thin – only 65 mm deep 
  • Short – two available heights: 300 mm (radiation-convection), 400 mm (E-VENT series)
  • Heat emission: thermal radiation from the heater surface + convection, back side is cold 
  • Fan option (E-VENT) designed for low temperature installations
  • All colours from  RAL palette with no extra charge

Inspiro radiators - brochure

 


 

Grzejnik INSPIRO E-VENT

INSPIRO E-VENT

INSPIRO heaters in E-VENT version are structurally adjusted for fan mounting (fans – in case of longer radiators). Inside the heater, in its bottom part, there is an excision, for a fan. Inside it, are magnets that allow easy install and removal of the fan. Thanks to the fan, the radiator can work with variable power. Depending on the user needs, there is a possibility to control the heating dynamism (optionally).

INSPIRO E-VENT heaters can be used in any type of installation – copper, plastic (designed for central heating installation) or traditional steel. They can work with many different heat sources: electric boilers, gas, oil and also urban heat distribution networks. Because of its working parameters (1, 5 MPa, 110ºC), they can be used with steam powered installations.

Grzejnik INSPIRO

A fan enhancing convection, greatly increases the effectiveness of INSPIRO heaters in low temperature installations with ecological heat sources, such as: condensing boilers, heat pumps, multi source systems with buffer. A fan is also useful in situation, when it is necessary to quickly raise the temperature in the room e.g. during colder periods or in objects used periodicall.

Controls for INSPIRO E-VENT are based on thermo-electric actuator T30NC 230V and temperature regulator RT200. Each INSPIRO E-VENT radiator is equipped with silent running fan (up to 31 dB). 

 

 

INSPIRO – NATURAL CONVECTION – MODEL B - side connection

Radiator type Designation Height [mm] Lenght [mm] Width [mm] Weight [kg] Fan Power [W] 75/65/20 Power [W] 55/45/20
Power [W] Weight [kg]
INSPIRO B 300/600 INB 300/600 300 600 62 3,7 / / 299 157
INSPIRO B 300/1000 INB 300/1000 300 1000 62 5,1 / / 498 262
INSPIRO B 300/1400 INB 300/1400 300 1400 62 6,5 / / 697 366
INSPIRO B 300/1800 INB 300/1800 300 1800 62 7,9 / / 897 471

 

INSPIRO – NATURAL CONVECTION – MODEL D - bottom connection

Radiator type Designation Height [mm] Lenght [mm] Width [mm] Weight [kg] Fan Power [W] 75/65/20 Power [W] 55/45/20
Power [W] Weight [kg]
INSPIRO D 300/600 IND 300/600 300 600 62 3,8 / / 299 157
INSPIRO D 300/1000 IND 300/1000 300 1000 62 5,2 / / 498 262
INSPIRO D 300/1400 IND 300/1400 300 1400 62 6,6 / / 697 366
INSPIRO D 300/1800 IND 300/1800 300 1800 62 8,0 / / 897 471

 

INSPIRO E-VENT – FAN ASSISTED CONVECTION – MODEL B - side connection

Radiator type Designation Height [mm] Lenght [mm] Width [mm] Weight [kg] Fan Power [W] 75/65/20 Power [W] 55/45/20
Power [W] Weight [kg]
INSPIRO E-VENT B 400/600 INB/E/400/600 400 600 62 3,9 21 0,685 521 290
INSPIRO E-VENT B 400/1000 INB/E/400/1000 400 1000 62 5,5 21 1,035 869 484
INSPIRO E-VENT B 400/1400 INB/E/400/1400 400 1400 62 7,1 42 1,720 1216 677

 

INSPIRO E-VENT – FAN ASSISTED CONVECTION – MODEL D - bottom connection

Radiator type Designation Height [mm] Lenght [mm] Width [mm] Weight [kg] Fan Power [W] 75/65/20 Power [W] 55/45/20
Power [W] Weight [kg]
INSPIRO E-VENT D 400/600 IND/E/400/600 400 600 62 4,0 21 0,685 521 290
INSPIRO E-VENT D 400/1000 IND/E/400/1000 400 1000 62 5,6 21 1,035 869 484
INSPIRO E-VENT D 400/1400 IND/E/400/1400 400 1400 62 7,2 42 1,720 1216 677

 

AttachmentSize
inspiro-en.pdf422.55 KB
post-bottom-line